2.18 Reciprocal leveling involving.. single level was used to transfer height. across a river between two points R1 and R2 70 m apart. Using the following readings, calculate the height change from R1 to R2
The extract given below is for levels taken.. between two TBM, calculate the adjusted reduced levels for all the entries in the book. Arithmetic check
2.15 For the leveling shown.. 2.15 For the leveling shown below, calculate adjusted reduced levels for all points in the level table Expert Answer ♥♥♥ ANSWER 2.15 For all station, HPC = known Reduced Level
2.13, A digital level was checked for collimation error using a two-peg test and the following results were obtained. With the level midway between two pegs B1 and B2 which are 40 m apart: Staff
The readings obtained from a two-peg test carried.. 2.1 The readings obtained from a two-peg test carried out on an automatic level with a staff placed on two pegs A and B 50 m apart are:
© unipeppa.2025. All rights Reserved.