A cantilever beam is needed to resist the loading shown below. Select a suitable UB section in S 275 steel to satisfy
bending and shear criteria only assuming full lateral restraint.
Solution
Unit weight of materials used in Construction The unit weight of materials is an important factor to consider in engineering and construction projects. It refers to the weight of a material per unit volume, typically
Question For the smooth vertical wall shown in Figure Q1, determine the total active thrust on the wall and the position where it acts. Ground water level is at a depth of 1.5 m. Solution
Question A 10 m high retaining wall has been holding a soil with the following composition: G=2.65, e= 0.50, w=10%, and ะค=20 degrees. Determine the active thrust on the wall due to soil and water,
Question For the smooth vertical wall shown in figure below. Determine the total active thrust on the wall and the position where it acts. ground water level is at a depth of 1.5m Solution